|
GENERAL INFORMATION: |
| Model 9100 is a
highly flexible access control terminal. It may control the electric lock by
using the magnetic card. Model 9100 offers reliable and future-oriented
access control solutions to meet most requirements in most areas. It can be
used either as an off-line stand-alone access control unit or as an on-line
access control terminal. |
|
FEATURES: |
The
major features of model 9100 are:
- Heavy duty steel enclosure
to avoid being broken.
- 16 character LCD with back
lighting to display message.
- Memory backup can be up to
48 hours.
- Use magnetic stripe card
Track 2, ISO standard.
- The number of user's card
can be from 0000 to 3999.
- Personal ID number (PIN)
can be from 0000 to 9999.
- Two external drives: Drive
1 for door lock and Drive 2 for alarm.
- Provide a connection for
indoor switch to open the door lock from inside the room.
- Provide a connection for
alarm sensor to detect the door security.
- Provide a connection for
external second card reader.
- Use a Master card or
keypad to program the unit, or use PC to program when on-line connection.
- Provide a 4¡Ñ4 keypad to
enter the PIN or to program the unit.
- Door lock open period is
programmable from 1 to 99 seconds.
- Provide real time clock.
- Door open mode can be set
as :swipe card only" or "press keypad only" or "swipe card plus press
keypad".
|
|
SPECIFICATIONS: |
- Power requirements:12 VDC
10% 250 mA
-
Dimensions:4.55"¡Ñ4.12"¡Ñ1.5"
- Output: Door lock strike
relay:12V, 3A MAX
Alarm siren relay: 12V, 3A MAX
- Input: One for indoor
egress switch
One for alarm sensor
One for the second card reader
- Display: LCD 16 characters
with back lighting
- Keypad : 4¡Ñ4 membrane
switch
- Data communication: RS-485
- Memory:32K
|
