CCD 170 Mini Barcode Scanner

► See Information Below
 

Your Cost:  $180

INTRODUCTION:
MiniBarCCD170 is the smallest CCD barcode scanner in the market. It is specially designed to read mini-barcodes and micro-barcodes. Of course, it can read normal barcodes as well. Especially good for catalogue-ordering system applications.
The CCD170 is equipped with a magnet for attaching the unit on any metal surface easily.

ADVANTAGES:
  • Very small footprint, 96 x 63 x 16mm
  • Light weight, ablout 48g without cable
  • High resolution
  • High reliability
  • Low power consumption
  • Special holder design, easy for using
  • Read mini-barcodes or micro-barcodes or normal barcodes as well
  • All-in-one decoder interface with interchangeable module cable sets

AVAILABLE MODELS:
  • CCD170K --- PC/AT Keyboard Emulation
  • CCD170R --- RS-232 Interface

READABLE CODES:
ITF, JAN, EAN, CODE39, CODE 93, NW7, CODE128, CODABAR, TOSHIBA CODE
SPECIFICATIONS:
  • Electrical:
     
    Operating voltage
    Power consumption    		 5 V DC
    60mA typical
  • Optical:
     
    Photo sensor
    CCD sensor resolution
    Light source    		 CCD sensor
    2088 pixels
    660 nm LED
  • Reading:
     
    Print contrast signal(PCS)
    Scan rate
    Resolution
    Reading distance
    Reading width
    Reading Method    		 45% minimum
    45 scans/sec
    0.1mm(4 mil)
    contact to 10mm
    20, 40 or 60mm
    switch trigger
  • Mechanical:
     
    Dimensions
    Weight

    Case
    Cable length    		 96(L)x63(W)x16(H)mm
    48g without cable
    70G with cable
    ABS
    1500mm
  • Environment:
     
    Operating temperature
    Storage temperature
    Humidity    		 0 to 40 Deg. C
    -20 to 60 Deg. C
    20% to 85% RH