RF1356 /RF18 13.56MHz RFID READER

INTRODUCTION:

PRONAG 13.56MHz RFID  readers are high performance readers featuring long rang and small dimensions. The readers utilize GIGATEK 13.56 MHz technology to read. PROMAG`s GTcard  Line of 13.56MHz contact less cards. 13.56 MHz RFID has less interference than 125 KHz. The small footprint of the reader module make it ideally suited to a wide variety of applications , such as Access Control .Time & Attendance , System Access Security and any ID authentication....etc.

The same basic unit can be configured to output most of the common interface formats, including Magstripr ABA TK2 emulation. Wiegand and RS-232 serial ASCII output, making it easy to upgrade existing installations.

FEATURES:

  • Low cost 
  • Long read rang
  • Small outline 
  • Potted fir environment protection & weather resistant
  • Designed  to work with PROMAG`s GTcard  line of contactless 13.56MHz RFID cards
  • Externally programmable output interface
  • Easily integrated with most existing ID authentication

APPLICATIONS:

  • Access Controls
  • Time & attendace
  • System Access Security
  • ID Authentication Systems
  • Car Parking Systems
AVAILABLE MODELS:

  • RF1356-small reader module without internal antenna for OEM applications, PCB plug- fitting

  • RF1356ANT- mall reader module without internal antenna for OEM applications, PCB plug- fitting up to 7cm read rang with CFR04 GTcard

  • RF18- combines antenna and electronics , standard electric gang box fitting ,ready for wall-mounting up to 15cm read range with CFR04 GTcard

SPECIFICATIONS:

 

Power Requirement: 5VDC regulated , linear

Interface : Wiegand 26 bit ,Magstripe ABA TK2 or RS232.

Frequency: 13.56MHz

Modulation: APM ( Amplitude Pulse Modulation)

Format: GTcard coding

            (ID code 40 bits , 10 digits Hex)

Read Rang:

  • RF1356- no reading without external antenna up to 20cm with proper external antenna    with CFR04 GTcard

  • RF1356ANT- up to 7cm  with CFR04 GTcard

  • RF18- up to 15cm with  CFR04 GTcard

Dimensions:

  • RF1356- 39*21*7mm

  • RF1356ANT- 41*24*11mm

  • RF18 -104*63*20mm

Transponder (GTcard)

  • 13.56MHz unique ID code 40 bits 10 digits Hex, Read only 

  • Chip type: GT1256, Passive (no vbattery)

  • Available Transponders: Weather resistant

    • CFR04: 86*54*2mm

    • CFR05: 86*54*1mm